You watch the caravan coming up the road from far off, counting at least two guards and a handful of merchants. Only one of them is on horseback, with the cart pulled by a sad pair of mules.
You feel confident in your new Rogue Arm, smirking as you signal to your fellows who lie in the shadows. There may not be much to steal, but you and your mates will take it all.
Epic Armoury’s Epic Dark Rogue Arm is a pair of vambraces featuring intimidating, pointed elbow couters. These vambraces protect the top of the forearm down to the wrist, secured by two comfortable leather straps. Rolled edges and small ridges around the rim further protect the elbow and arm, making it less likely that you would take a lucky strike from an enemy
The Rogue Arm is designed to match Epic Armoury’s Rogue Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather, this armour set is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.
Available in Polished Steel or Epic Dark; and in One Size.
Plate armour became more popular as firearm technology became more prevalent during the 13th century
Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
Made from 1mm/19 gauge thick mild steel
Rolled edges with no sharp edges
Straps and fittings made from top-grain leather
Hand made, welded pieces for maximum durability
Epic Armoury Dark oxidization resistant coating
Epic Armoury Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.
If your armour does get wet, it is important that you dry it thoroughly as soon as possible.
After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
Rust-Prevention and Removal
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.
Leather Straps and Fittings
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.